Call an Expert Now!


Mon-Fri: 8AM-5PM (EST)

Free Shipping to United States

Better Price Guarantee

Live Customer Support

Shop Top Solar Brands


AIMS Power | 5000 Watt Pure Sine Power Inverter

Questions? We're Here to Help!

Speak to a Trusted Expert Now: (240) 877-4022


✔️ Fast and Free Shipping - While Stock Lasts

✔️ Lowest Price Guaranteed

✔️ Lifetime Customer Support

✔️ No Sales Tax Outside of Maryland


AIMS Power | 5000 Watt Pure Sine Power Inverter


48V 50/60 hz- Industrial


Overview: 5000 Watt Pure Sine Inverter – Industrial Grade – 48 VDC 50 & 60 hz.AIMS Power is proud to bring you this new 5000 Watt Pure Sine Power Inverter, designed for harsh environments, which has been completely overhauled and now boasts a dual GFCI outlet and is FCC certified.

This product also includes a thermally controlled fan, allowing for increased efficiency and less noise. It will continue to put out stable, pure sine power and maintain output voltage, even as you battery bank voltage decreases. High output performance is achieved through a DSP (Digital Signal Process) drive.

This inverter is ideal for running nonlinear loads (such as variable speed motors and small compressors). Pure sine power is also preferred for LaserJet printers, sensitive electronics, computer servers, microwaves, medical equipment, any with a circuit board and cordless drill battery chargers. An external battery voltage sensor will allow you to monitor your battery capacity and power consumption.

Packed with 5000 watts of power, this inverter can be used for off-grid home back up power systems, solar, boat, work vehicles and RVs. We designed this inverter to be more efficient operating at 48 VDC at higher loads.


• 5000 Watt continuous power
• 10000 Watt surge for 0.5 second
• 48 Volt DC input
• Pure sine wave
• 60hz or 50hz switch
• Highly efficient – improved ouptut at low voltage
• 2 – GFCI Dual Outlet
• Direct connect AC Terminal Block
• Connector and cable for remote on/off switch
• Isolated ground & neutral
• Short circuit protection (GFCI and AC Breaker)
• On/off switch
• 5 Function Protection LED indicator
• AC Breaker
• DC volt meter included
• Dual cooling fans thermally controlled
• Instruction manual
• 1 year tech support
• 1 Year Warranty Parts and Labor replacement




• DC Input Voltage 48 V (41V-60V)
• Output Voltage no load 120Vac +/- 3%
• Continuous 5000 Watts
• Surge 10000 Watts
• 90% Efficiency @ full load
• No Load Current (Fan Off) 0.60A 48V
• No Load Current (Fan On) 1.08A 48V
• Low Battery Shut Down: 40.0V
• Low Battery Return on Power: 42.5V
• High Battery Shut Down: 62.9V
• High battery return on Power: 58.8V
• Frequency Selection 50/60hz
• Over Temperature Protection: -25ºC – 79ºC
• Cooling Fan on Temperature: 40ºC
• GFCI Outlets rated at 20A per block.
• Dimensions (inches) 23.75 x 8.88 x 6.25
• Weight: 27lbs

User Manual

 AIMS 5000 Watt Pure Sine 48 Volt Power Inverter – PWRIG500048120S





AIMS Power Warranty & Returns


All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

• 1-Year for non ETL (Extract, Transform and Load) units

• 2-Years for ETL (Extract, Transform and Load) units and batteries

• 3 Years for generators

• Batteries – product specific

• Solar products – product specific

• Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.



Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

• Products that AIMS Power™ determine, in its sole discretion, to be free of any material or workmanship defects or flaws

• Products evidencing excessive wear, misuse or alteration

• Products with missing or defaced labels, stickers, serial numbers or other identifying information

• Improper care or storage (e.g. water damage, exposure to extreme heat or cold temperatures, unsanitary environment)

• Alterations or customizations

• Items that were purchased second hand, or from an unauthorized seller (if you want to know if a seller is authorized, call us at 775-359-6703)

• Items outside of the covered warranty period

RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.


Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

• Contact AIMS Power™ via the AIMS Power return portal at to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

• An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.

• Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.


Other Items of note:

• AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.

• Any requested information that is not provided in a timely manner could result in delayed processing of your return.

• When shipping the product for a return:

1.) Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.

2.) Ensure some form of shipment tracking is used.

3.) It is strongly recommended to insure the shipment.

4.) AIMS Power™ is not liable for products that are lost or damaged in-transit.

• The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.

• For any other questions please contact us via