AIMS Power | 10000 Watt Pure Sine Inverter Charger 48 Vdc / 240Vac Input & 120/240Vac Split Phase Output

Built with a 48 volt DC input, this inverter performs with very little power loss.

Users receive a notable increase in efficiency in large systems when compared to using 12 or 24 volts, which can be an attractive feature for sustainability lovers looking to live as efficiently as possible.

The most common use for this inverter is emergency backup power in homes, business and recreation locations. You’ll always be prepared for the next power outage with access to 10000 watts of continuous power and 30,000 watts of surge (for up to 20 seconds).

However, we recommend recharging your battery bank with AIMS Power solar panels — a cleaner form of power. Make a step in the right direction when it comes to preserving this beautiful planet by choosing an inverter powered by renewable energy when building your next electrical system.

This monster of an inverter can pretty much get any job done imaginable. The development of this new DC-to-AC inverter technology combined with the existing environmental benefits of renewable energy usage puts this product in high demand among AIMS Power customers.

One of the most sought-after features this inverter has is the direct-connect terminal block, which allows users to surpass the 10000 watt capacity and harness its 300% surge power (up to 30,000 watts for 20 seconds as previously stated).

AIMS Power also has a 10,000 watt modified sine inverter if you’re looking for something with a few less features and a lower price. We’re constantly reinventing our products so that users are provided with the best technology available on the market.

When you purchase a low frequency inverter charger from AIMS Power, you’re getting our top-of-the-line product offering. The unit is repairable, and we stand behind it with a free one-year warranty and tech support.

Have a hunting cabin or off-grid vacation home? This AIMS Power inverter is perfect for supplying reliable electricity to the entire house.

It’s also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally-controlled fans. And it’s protected from humidity or dust and dirt by virtue of its marine-coated or “conformal-coated” boards.

This inverter provides the reliability needed in any business or residential emergency backup power applications. If you need an identical inverter with a bit more power, try our new 12000 watt low frequency inverter charger.

Features

Product Features

• 10000 watt low frequency inverter 110/220Vac Split Phase
• 30000 watt surge for 20 seconds -3x surge capability
• Battery Priority Selector
• Terminal Block
• Marine Coated and Protected
• Multi Stage Smart charger 100 Amp charges GEL, Lead, AGM, Lithium
• Remote panel available
• 10msec typical transfer time
• Selectable 25W power save mode (hibernation)
• 8 battery charger settings
• Automatic transfer switch 

Specs

• Download User Manual

Inverter Output Specifications:
• Continuous Output Power: 10000 Watts
• Surge Rating: 30000 Watts (20 Seconds)
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• 100-110-120Vac / 220-230-240Vac
• Nominal Efficiency: >88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• THD: < 10% DC
• Ambient operating temperature: 14°F to 122°F (-10°C to 50°C)

Input Specifications:
• Nominal Input Voltage: 48.0Vdc
• Low Battery Alarm: 42.0Vdc-44.0Vdc
• Low battery Trip: 40.0Vdc-42.0Vdc
• High Voltage Alarm: 64.0Vdc
• Low battery Voltage Restart: 62.0Vdc
• Idle Consumption: 150 Watts
• Power Saver Mode Idle Consumption: 35 Watts

Charger Specifications:
• Output voltage: Depends on battery Type
• Charger Rate: 100A

Dimensions:
• Unit Weight: 145.5 lbs.
• Unit Size L x W x H: 23.3 x 16.3 x 7.9 inches
• Shipping Weight: 190 lbs.
• Shipping L x W x H 30 x 21.25 x 15.25 inches

AIMS Power Warranty & Returns

Warranty

All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

• 1-Year for non ETL (Extract, Transform and Load) units

• 2-Years for ETL (Extract, Transform and Load) units and batteries

• 3 Years for generators

• Batteries – product specific

• Solar products – product specific

• Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.

NO REFUNDS AFTER 30 DAYS. REPAIR OR REPLACE ONLY.

Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

• Products that AIMS Power™ determine, in its sole discretion, to be free of any material or workmanship defects or flaws

• Products evidencing excessive wear, misuse or alteration

• Products with missing or defaced labels, stickers, serial numbers or other identifying information

• Improper care or storage (e.g. water damage, exposure to extreme heat or cold temperatures, unsanitary environment)

• Alterations or customizations

• Items that were purchased second hand, or from an unauthorized seller (if you want to know if a seller is authorized, call us at 775-359-6703)

• Items outside of the covered warranty period

RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.

Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

• Contact AIMS Power™ via the AIMS Power return portal at https://aimspower.returnsportal.net/ to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

• An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.

• Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.

Other Items of note:

• AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.

• Any requested information that is not provided in a timely manner could result in delayed processing of your return.

• When shipping the product for a return:

1.) Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.

2.) Ensure some form of shipment tracking is used.

3.) It is strongly recommended to insure the shipment.

4.) AIMS Power™ is not liable for products that are lost or damaged in-transit.

• The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.

• For any other questions please contact us via sales@romeosolar.com.