Call an Expert Now!


Mon-Fri: 8AM-5PM (EST)

Free Shipping to United States

Better Price Guarantee

Live Customer Support

Shop Top Solar Brands


AIMS Power | 1000 Watt Pure Sine Inverter Charger 12 Volt

Questions? We're Here to Help!

Speak to a Trusted Expert Now: (240) 877-4022


✔️ Fast and Free Shipping - While Stock Lasts

✔️ Lowest Price Guaranteed

✔️ Lifetime Customer Support

✔️ No Sales Tax Outside of Maryland


AIMS Power | 1000 Watt Pure Sine Inverter Charger 12 Volt

AIMS Power 1000 Watt Pure Sine Inverter Charger


Overview: Here's the AIMS Power 1000 Watt Pure Sine Low Frequency Inverter with built-in battery charger. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it to: off-grid home back up power, solar systems,  business back-up power, campsites, tailgating parties or any recreational locations.


Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 1000 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions.


This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension chord plugged into your wall outlet at home. This inverter charger is capable of a 3000 watt surge for 20 seconds and can run at 1000 watts continuously.


As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection.


With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power.


The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it.


An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite.



• 1000 watt low frequency inverter

• 3000 watt surge for 20 seconds 300% surge capability

• Battery priority selector

• Terminal block

• GFCI outlet – 10 amps

• Marine coated and protected

• Multi stage smart charger 35 Amp for gel, AGM, lead and lithium LiFePO4

• Remote panel available

• Auto frequency

• 10msec typical transfer time

• Selectable 25W power save mode (hibernation)

• 7 battery type settings for charger

• Automatic transfer switch




Inverter Output Specifications:

• Continuous Output Power: 1000 Watts

• Surge Rating: 3000 Watts (20 Seconds)

• Output Waveform: Pure Sine/Same as input (Bypass Mode)

• Nominal Efficiency: >88% (Peak)

• Line Mode Efficiency: >95%

• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz

• Typical Transfer Time: 10ms (Max)

• Bypass Breaker – 20 amps

• THD: < 10% DC

• Ambient operating temperature: 14°F to 122°F (-10°C to 50°C)



Input Specifications

• Nominal Input Voltage: 12.0Vdc

• Minimum Start Voltage: 10.0Vdc

• Low Battery Alarm: 10.5Vdc-11.0Vdc

• Low Battery Trip: 10.0Vdc-10.5Vdc

• High Voltage Alarm: 16.0Vdc

• Low Battery Voltage Restart: 13.3Vdc

• Idle Consumption: &lt 12.5 watts

• Charger Breaker 10 amps

• Power Saver Mode Idle Consumption: <7.5 wattsC


Charger Specifications

• Output Voltage: Depends on battery Type

• Charger Rate: 35A

• Over Charge Protection Shutdown 15.7V

• Selectable Charge Setting Dial

• Adjustable Charge Current: off-20%-100%

• Four Stage Smart Charger


Transfer Switch Specifications

• 30 amp auotmatic transfer switch

• 10 ms (max)



• Unit Weight: 35 lbs.

• Unit Size L x W x H: 14.1 x 8.74 x 7.10 inches

 Shipping Weight: 39 lbs.

  Shipping L x W x H 20.75 x 12.75 x 12.50 inches


User Manual 

 AIMS Power 1000 Watt Inverter Charger – PICOGLF10W12V120VR





AIMS Power Warranty & Returns


All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated:

• 1-Year for non ETL (Extract, Transform and Load) units

• 2-Years for ETL (Extract, Transform and Load) units and batteries

• 3 Years for generators

• Batteries – product specific

• Solar products – product specific

• Cables – 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products.



Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.
The warranty does not cover the following:

• Products that AIMS Power™ determine, in its sole discretion, to be free of any material or workmanship defects or flaws

• Products evidencing excessive wear, misuse or alteration

• Products with missing or defaced labels, stickers, serial numbers or other identifying information

• Improper care or storage (e.g. water damage, exposure to extreme heat or cold temperatures, unsanitary environment)

• Alterations or customizations

• Items that were purchased second hand, or from an unauthorized seller (if you want to know if a seller is authorized, call us at 775-359-6703)

• Items outside of the covered warranty period

RECEIVING YOUR ORDER – Be sure to inspect for any damage or incorrect quantities BEFORE signing for the product. If you accept the product, make sure to have the carrier NOTE the damage before signing.


Warranty Return Process

It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

• Contact AIMS Power™ via the AIMS Power return portal at to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

• An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.

• Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.


Other Items of note:

• AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 30 days.

• Any requested information that is not provided in a timely manner could result in delayed processing of your return.

• When shipping the product for a return:

1.) Ensure the product is packed accordingly to avoid being damaged in-transit.  Include original packaging. Use proper protective material to ensure package arrives without damage.

2.) Ensure some form of shipment tracking is used.

3.) It is strongly recommended to insure the shipment.

4.) AIMS Power™ is not liable for products that are lost or damaged in-transit.

• The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.

• For any other questions please contact us via